As can be seen from this example, the recommended rates of pelletized lime cannot be greatly reduced as compared to bulk ag lime. If less than this amount of pelletized lime is used, the expected soil pH change will probably not be obtained. In this case, 1560 lbs/ac of pelletized would be required to equal one ton of ag lime. This is calculated by dividing the average neutralizing value of ag lime by the neutralizing value of the pelletized lime being used (67 ”85= 0.78). If this is the case, the lime rate can be reduced to 78% of what would be recommended for bulk ag lime. For example, a high quality pelletized lime source may have a neutralizing value of 85. The information to calculate the neutralizing value should be on the pelletized lime bag, and the method to calculate the neutralizing value can be found in publication AGR-106,University of Kentucky College of Agriculture. Therefore, if the neutralizing value of pelletized lime is substantially higher than 67%, then the recommendation should be lower. All lime recommendations in Kentucky are based on this value. The finer the lime particles and the higher the calcium carbonate equivalent, the more effective the lime and the lower the rate of lime needed to make the desired pH change.īulk ag lime sold in Kentucky has an average neutralizing value of 67% when averaged for all quarries. As these two properties of lime change, so does the recommended rate of lime and its effect on soil pH. The recommended rates and the effect on soil pH of any agriculture lime product is related to the neutralizing value of the lime, which is a combination of the purity (calcium carbonate equivalent) and the fineness of grind (particle size). How Much Can the Rates be Reduced for Pelletized Lime? Some questions have been raised about recommended rates of this material and the speed at which it reacts compared to standard ag lime. However, the product is becoming more commonly used in production agriculture. The price of the material on a per ton basis is considerably higher than bulk ag lime, so its use has mainly been confined to specialty markets, with little use in production agriculture. Pelletized limestone is a product that has been on the market for many years. In general, the pelletized lime contains about 9% lignosulfonates. The fine lime particles are bonded together with lignosulfonates during the pelletizing process. It may be dolomitic or calcitic depending on the nature of the original limestone. Pelletized lime is made by granulating finely ground agricultural (ag) lime. Murdock which contradicts what I have always heard. I was checking into this a while backand came across this article by Lloyd W. Therfore on my small plots I have always used pelletized lime being I am always in a hurry and usually running late. I was told that pelletized lime is faster than ag lime to be utilized.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |